8515, el terminal embarcable compacto

Antenna, 2.4 GHz 0 dBi Mag Mount RP-SMA

An antenna mounted on the top of the forklift truck is ideal for extending the coverage area of your vehicle mount computer.

Part No: 9009793 Model No: N/A

 

Antenna, 2.4 GHz 5 dBi Randome Mag Mount RP-SMA

An antenna mounted on the top of the forklift truck is ideal for extending the coverage area of your vehicle mount terminal.

Part No: 1008926 Model No: N/A

 

Antenna, 2.4 GHz dipole 2 dBi reverse polarity SMA connector

Dipole antenna allows your vehicle mount computer to connect to a 802.11 wireless network.

Part No: 20667-002 Model No: N/A

 

USB to Ethernet Adapter For 8515

This accessory connects to the back of a desktop docking station, allowing Ethernet communication to the 8515 and WORKABOUT PRO. Data Communication would occur at USB speeds.

Part No: N/A Model No: WA4010-G1

 

Screen Protector (pack of 2)

Keep your vehicle mount computer screens clean and safe from damage with these handy protectors.  2 protectors/package.

Part No: N/A Model No: VA6130

 

Speaker/Mic with Push-to-Talk Function

In combination with PTX Connect, the Speaker/Mic enables the 8515 to replace a walkie-talkie by voice-over-IP.

Part No: N/A Model No: M1000

 

VESA Plate (for 4" or 12" RAM arm)

The VESA plate can be used with the 4" or 12" RAM arm to mount a vehicle mount computer on any plane.

Part No: N/A Model No: MT3501

 

Clamp Base (for 4" or 12" RAM arm)

Clamp the RAM arm on bars with square or rectangular cross section.

Part No: N/A Model No: MT3505 / MT3507

 

Round Plate (for 4" or 12" RAM arm)

Centric, smaller footprint.

Part No: N/A Model No: MT3502

 

RAM mount, 4" arm with 1 VESA plate

The easily installed RAM mount allows a terminal to be mounted on any plane of the 360 degree locking system. 4" short arm.

Part No: N/A Model No: MT3401

 

RAM mount, 12" arm with 1 VESA plate

The easily installed RAM mount allows a terminal to be mounted on any plane of the 360 degree locking system. 12" long arm.

Part No: N/A Model No: MT3402

 

Rail Base (for 4" or 12" RAM arm)

Clamp the RAM arm on round tubes.
1-1/4" to 1-7/8" and 2" to 2 1/2" pipe diameters.

Part No: 9007509 / 9007510 Model No: MT3509 / MT3510

 

Quick Release Mount Turn & Lock

The Quick Release Mount “Turn & Lock” is available for 8515, 8525 G2 and 8530 G2, and allows a dismount with a flick of the wrist in no time and without the need of tools.

It can be used alone or in combination with the RAM mounts.

Part No: N/A Model No: MT3250

 

Pre-Regulator

The pre-regulator allows installations on truck with batteries higher than 24V.

• Wide input voltage range (15V to 90V).
• Easy installation.
• Protected against dust and water.
• Resistant against shocks and vibrations.
• Can handle voltage fluctuations including transients and ripples that are typical in forklift power supplies.

 

Part No: N/A Model No: PS1350

 

Power Extension Cord

This power extention cord is ideal for connecting your vehicle mount computer to the forklift power supply.

Part No: N/A Model No: CA1210

 

Power Supply 18V 3.3A 110/220VAC with Cable

18V 3.3A 110/220 VAC with cable.

Part No: N/A Model No: PS1400