Ikôn, el terminal PDA robusto y elegante

5000 mAh Li-Ion Battery

The 5000 mAh lithium-ion batteries can be charged using a variety of chargers and docking stations along with an Ikôn internal charger.

Note: CH3000 battery packs shipped from the factory are charged to approximately 40% and must be fully charged prior to use.

Part No: N/A Model No: CH3000

 

USB-A (Female) to Handylink

A 6 in cable (CA1033) is available and can be used with locking assembly or removable assembly.

 

Part No: N/A Model No: CA1033

 

Tether to USB Device

CA1032 is a tether to USB device which can be used with locking assembly or removable assembly.

Part No: N/A Model No: CA1032

 

USB-A (Female) to Handylink

A 6 in cable (CA1033) is available and can be used with locking assembly or removable assembly.

 

Part No: N/A Model No: CA1033

 

USB to Ethernet Adapter for Ikôn

This accessory connects to the back of a desktop docking station, allowing Ethernet communication to Ikôn.  Data Communication would occur at USB speeds.

Part No: N/A Model No: WA4010-G1

 

AC Wall Adapter

The Ikôn AC adapter allows users to operate Ikôn using AC power while charging the battery inserted in the unit.

Adapter plugs suitable for use in the following countries are shipped with the AC wall adapter: United Kingdom, Switzerland, Japan, Israel, Australia, Europe, and North America

The AC adapter is used as follows:

• Choose the adapter plug that is suitable for use in your country. Slide the adapter plug into the Universal AC power supply, snapping it into place. These two pieces, coupled together, are referred to as an AC wall adapter.
• Insert the DC power plug into the DC IN port at the base of the Ikôn, located between the tether and LIF ports.
• Plug the pronged end into an AC outlet.
  

Part No: N/A Model No: PS1051-G1

 

Nylon Pouch

The CH6092 Carry Case is a nylon pouch without a flap that offers easy and fast removal of Ikôn.  It also includes a belt clip.

 

Part No: N/A Model No: CH6092

 

Tethered Kit

The Ikôn tethered kit consists of stylus and tether. This kit is designed to provide operator work safety and comfort.

Note: Tether comes attached to a retractable stylus – no assembly required.

Part No: 1081135 Model No: CH6020

 

Ikôn Handstrap Kit

The handstrap kit provides a secure means for operators to carry the Ikôn and it is attached by fixing the ends of the strap to the anchors located on the back and bottom of the unit.

Note: Tether comes attached to retractable stylus – no assembly required.

Part No: 1081131 Model No: CH6021

 

Carry Case Pouch

The CH6091 Carry Case pouch is made of Koskin material, includes a locking, swivel belt clip and provides easy access to the bottom connector and DC port.

 

Part No: N/A Model No: CH6091

 

Leather Functional Case

The CH6095 Carry Case is a fully functional leather carry case that offers access to all features including camera, full keypad, side buttons etc. It also includes a belt clip.

Part No: N/A Model No: CH6095

 

Quad Dock

The CH4004 Quad Dock provides for simultaneous charging of up to 4 devices.  It has anti-slip feet for use on tables and desks, full Ethernet connection to each terminal, access to all buttons and Keys, spare stylus holder and drain holes for damp terminals, rugged mating connector, and keyholes for even more secure mounting to shelves.

Part No: 8000161.3 Model No: CH4004

 

Single Dock

The CH4000 Single Dock provides spare battery charger with charge indicator LED, rugged mating connector, drain holes for damp terminals or batteries, spare stylus holder, 5V 4A power input from separate power supply, and USB 'A' and USB 'B' connection (no simultaneous use).  It also provides access to all keys and buttons while the Ikôn is docked.

Part No: 8000160.2 Model No: CH4000

 

Non Powered Vehicle Cradle for Ikôn

The Non Powered Vehicle Cradle provides access to all buttons and Keys and to both connectors on the bottom.  It comes equipped with Spare stylus holder, multiple mounting configurations, and “Cable Tidy” that allows for safe keeping of tethered cables.

Part No: 1081147 Model No: CH1000

 

Powered Vehicle Cradle 12-24 V

The CH1005A Powered Vehicle Cradle features a single hand release mechanism, a speaker for hands free calling, a power indicator LED, a spare stylus holder, and multiple mounting configurations. 

The CH1005A comes with 3 port options: 1) USB A connector/2 RS232 Serial Ports, 2) USB A connector/1 RS232 Serial Port, or 3) USB A connector only.  It is also available with 2 power cable options: 1) CLA connector, or 2) Power Extension Cable.

Part No: N/A Model No: CH1005A

 

Mount RAM B 101

This extremely rugged, heavy-duty universal mounting system with 1” ball joints, allow the Vehicle Cradle to be mounted in any vehicle providing easy access to the Ikôn. This universal mounting system has locking joints and allows attached terminals to be adjusted three-dimensionally giving maximum display readability and device usability.

Comes with screws to connect to vehicle cradle.

Part No: 9011216 Model No: WA4006

 

AC Adapter 110-240V (power lead included)

Part No: 1050465 Model No: PS1050-G1

 

Cigarette Lighter Adapter (CLA) for Ikôn

The CLA gives users the flexibility of being able to power and charge the Ikôn on the go and fits any standard 12VDC car cigarette receptacle.

Part No: N/A Model No: CH3050